You can adjust it to boost by +1 dB or cut by –1.5 dB or –4 dB.įinally, a high-pass filter is included so that you can adjust the low end to the crossover frequency of a subwoofer if you add one to the system. Each monitor is bi-amplified, with a 100W RMS going to the woofer and 50W RMS to the AMT tweeter. It affects the signal from 2 kHz and higher. It allows you to tailor the response of the high-frequency driver. When engaged, it cuts frequencies from 250 Hz and below by your choice of –1.5 dB, –3 dB, or –6 dB. The first, Acoustic Space, is designed for reducing bass boost that can occur when monitors are placed close to walls or corners. The back panel offers three adjustable EQ options for tailoring the monitors to your room. I’d actually like to see a couple of more detents in the range, to give you more level choices that you know are balanced between the speakers. That way, you have three options Max, Min, and the center, where you can be sure both speakers’ levels are evenly set. I was glad to see that it has a center detent. A level knob is included that lets you adjust the loudness from Min to Max settings. I used the XLR inputs, but it’s handy to have such a wide choice. First, you can choose from three input formats: balanced XLR, balanced TRS 1/4” or unbalanced RCA. The back of the monitors offer quite a few options.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |